Multimeter W/ Voltect & Autotect - Holster & Case

Name: Multimeter W/ Voltect & Autotect - Holster & Case
Brand: Amprobe
SKU: AMPPM55A
Price: 98.1 USD

Part No.: PM55A

SKU: AMPPM55A

Colour, sizing or style depicted in some photos may not be exactly as described.
Please check your product description carefully before placing your order.

ToolDiscounter.com Ratings on Shopper Approved

Description

Compact Digital Multimeter with AutoTect and VolTect

AutoTect feature directs the meter to know if it is measuring ac volts, dc volts or resistance with no user interface
The AutoTect feature has lower input impedance which zeros out ghost voltages
Measures ac/dc current, capacitance, frequency, continuity with beeper plus includes Voltect, a built-in, non-contact voltage detector
Complete user protection with full safety ratings of CAT III 300 V, CAT II 600 V and UL and CSA listing
Large oversize digital display
Protective silicon holster included, attached test leads, battery, deluxe carry case and manual
One-year, no-hassle warranty
The ultimate shirt-pocket sized meter. Only 3/8 inch thick and less than 3 oz in weight with full functionality offering ac and dc voltage to 600 V, ac and dc current to 2000 µA, resistance to 6 Megohm, capacitance to 2000 µF, frequency to 30 kHz, diode test and continuity w/beeper.
It also offers VolTect, a built-in, non-contact voltage detector for ac voltages.
Another key feature is AutoTect, which automatically selects between ac voltage, dc voltage or resistance measurement based on the test point to which the leads are connected.
Fully autoranging, this meter offers nine different measurement functions plus features that are usually found in much more expensive and larger meters.
The digital display is oversized with large digits and unit icons in the display.
In spite of its size, this meter is fully safety rated to CAT III 300 V, CAT II 600 V and is UL listed.
No other meter this small offers such performance and high safety ratings.
Includes a silicone protective holster, deluxe carrying case, attached test leads, battery and manual.

6.000 V± (0.5 %+3 dgt)
60.00 V± (1.0 %+5 dgt)
600 V 2.0 % (AutoTect Lo-Z)
600 V 1.5 % + 5 dgt (Hi-Z only)
NMRR > 30 dB @ 50 Hz/60 Hz
CMRR > 100 dB @ DC, 50 Hz/60 Hz; Rs=1 k Ohms
Input impedance: AutoTect Lo-Z V dc: 833 kW (4.2 kW when displaying AUTO), 90 pF nom.
V dc AutoTect threshold: > +1.2 V dc or < -0.6 V dc nominal (Hi-Z V dc only)

6.000 V, 60.00 V, 600 V: ± (1.5 %+5 dgt)
CMRR: > 60 dB @ dc to 60 Hz, Rs=1 kOhms
Input impedance:AutoTect Lo-Z V ac: 160 kW, 160 pF nominal
Hi-Z ACV:5 MW, 90 pF nominal
ACV AutoTect threshold:> 1.5 V ac (50 Hz/60 Hz) nominal

100.0 nF, 1000 nF, 10.0 µF, 100.0 µF, 2000 µF***: ± (3.5 %+6 dgt)
*Accuracy below 50 nF is not specified ****Specified with battery voltage above 2.8 V (half full battery).
**Accuracies with film capacitor or better; Accuracy decreases gradually to 12% at low battery warning
***Updates > 1 minute on large values; voltage of approx. 2.4 V.

Range: Accuracy:
600.0 Ohms ± (2.0%+6 dgt)**
6.000 kOhms ± (1.2%+6 dgt)**
60.00 kOhms, 600.0 kOhms ± (1.0%+4 dgt)
6.000 MOhms ± (2.0%+4 dgt)
Open circuit voltage: 0.4 V dc typical
*AutoTect is for 6.000 kW ~ 6.000 MW ranges
**Add 40 dgt to specified accuracy while reading is below 20 % of range

10.00 Hz - 30.00 kHz*, ** ± (0.5 %+4 dgt) < 2 0 V Sine-rms
10.00 Hz - 999.9 Hz ± (0.5 %+4 dgt) < 600 V Sine-rms
*Sensitivity (Sine-rms): Hz in Auto-V ( position:> 3 V
**Line-level Hz in V position: @6.000 V ac range: > 3 V; @60.00 V ac range: > 6 V; @600.0 V ac range: > 60 V

400.0 µA: ± (1.5 %+3 dgt): 6 mV/µA
2000 µA: ± (1.2 %+3 dgt): 6 mV/µA

400.0 µA: ± (2.0 %+3 dgt): 6 mV/µA
2000 µA: ± (1.5 %+3 dgt): 6 mV/µA

15 V to 55 V -
30 V to 85 V - -
55 V to 145 V - - -
85 V to 190 V - - - -
Above 120 V - - - - -
Indication: Bar graph segments & audible beep tones proportional to field strength
Detection frequency: 50/60 Hz
Detection antenna: Top left corner of the meter

Open circuit voltage 0.4 V dc typical
Audible threshold 50 Ohms to 300 Ohms

Diode test current 0.48 mA
Open circuit voltage < 1.6 V dc

Display and update rate: 3-5/6 digits 6000 counts; Updates 5 per second nominal
Operating temperature: 0 degrees C - 40 degrees C
Relative humidity: Max. 80 % R.H. up to 31 degrees C, decreasing linearly to 50 % R.H. at 40 degrees C
Altitude: Operating below 2000 m
Storage temperature: -20 degrees C to approximately 60 degrees C, < 80 % R.H. (with battery removed)
Temperature coefficient: Nominal 0.15 x (specified accuracy)/ degrees C @ (0 degrees C to approximately 18 degrees C or 28 degrees C to approximately 40 degrees C), or otherwise specified
Sensing: Average sensing
Overload protection: 600 V dc and V ac rms
Low battery: Below approx. 2.4 V
Power supply: 3 V standard button battery x 1 (IEC-CR2032; ANSI-NEDA-5004LC)
Power consumption (typical): 6 mA for voltage functions on Auto-V W position & 2 mA for other functions
Automatic Power Off (APO) timing: Idle for 3 minutes
APO consumption (typical): 2.2 µA
Dimension/Weight: L 113 mm x W 53 mm x H 10.2 mm (4.4 x 2.1 x 0.4 in)/Approx. 78 gm (3 oz)
Special features: AutoTect (Automatic V & W selection) and VolTect (Electric Field Detection)
Agency approvals: CE, cULus
Safety: Meets IEC61010-1, UL61010B-1, CAN/CSA-C22.2 No. 1010.1-92, CAT II 600 V and CAT III 300 V, Pollution Degree 2, Class 2
E.M.C.: Meets EN61326