Equipped with a 0.45 HP motor and a 20:1 gear ratio, this pneumatic angle drill maintains 1000 RPM to facilitate clean breakthroughs during drilling applications. It is constructed with machined carbon fiber blades and carbon steel motor parts to allow for oil-free operation and a service life of 600,000 cycles. The precision-engineered angle head is supported by ball bearings and includes a ¼" (6.4 mm) x 28 TPI internal thread.
Equipped with a 0.45 HP motor and a 20:1 gear ratio, this pneumatic angle drill maintains 1000 RPM to facilitate clean breakthroughs during drilling applications. It is constructed with machined carbon fiber blades and carbon steel motor parts to allow for oil-free operation and a service life of 600,000 cycles. The precision-engineered angle head is supported by ball bearings and includes a ¼" (6.4 mm) x 28 TPI internal thread.
0.45 HP Precision Angle Drill 1000 RPM
Features
| Model | UT8891-10 |
| Motor | 0.45 HP |
| Gear | 20:1 ratio |
| Speed | 100 RPM |
| Exhaust | Rear |
| Chuck | 1/4" (6.4 mm) X 28TPI |
| Weight | 1.87 lbs (0.8 kg) |
| Length | 10.25" (26 cm) |
| Rec. Pressure | 90 psi (6.2 bar) |
| Air Inlet (NPT) | 1/4" (6.4 mm) |
| Rec. Hose (I.D. In.) | 3/8" (9.5 mm) |
| Air Cons (CFM) | 16 |
| Average Air Cons (CFM) | 4 |
| Model | UT8891-10 |
| Motor | 0.45 HP |
| Gear | 20:1 ratio |
| Speed | 100 RPM |
| Exhaust | Rear |
| Chuck | 1/4" (6.4 mm) X 28TPI |
| Weight | 1.87 lbs (0.8 kg) |
| Length | 10.25" (26 cm) |
| Rec. Pressure | 90 psi (6.2 bar) |
| Air Inlet (NPT) | 1/4" (6.4 mm) |
| Rec. Hose (I.D. In.) | 3/8" (9.5 mm) |
| Air Cons (CFM) | 16 |
| Average Air Cons (CFM) | 4 |
