Designed for finishing wood, composite, and painted surfaces, this pneumatic orbital jitterbug sander operates at 10,000 RPM with a 0.35 HP motor. It employs a 4 x 6" (15.2 cm) pad and a 3/16" orbit to achieve uniform surface preparation while a built-in regulator provides positive control. Furthermore, the rear exhaust incorporates a silencing system to limit noise output to 78 dBA during operation.
Designed for finishing wood, composite, and painted surfaces, this pneumatic orbital jitterbug sander operates at 10,000 RPM with a 0.35 HP motor. It employs a 4 x 6" (15.2 cm) pad and a 3/16" orbit to achieve uniform surface preparation while a built-in regulator provides positive control. Furthermore, the rear exhaust incorporates a silencing system to limit noise output to 78 dBA during operation.
3/16" (4.8 mm) Orbital Jitterbug Sander (4 Inch x 6" (15.2 cm) Pad)
Features
| Model | UT8791 |
| Orbital | 3/16" (4.8 mm) |
| Motor | 0.35 HP |
| Pad Diameter | 4" (10.2 cm) X 6" (15.2 cm) |
| Speed | 10,000 RPM |
| Weight | 2.4 lbs (1.1 kg). |
| Height | 3.8" (9.7 cm) |
| Rec Pressure | 90 PSI-6.2 Bar |
| Air Inlet (NPT) | 1/4" (6.4 mm) |
| Rec Hose (I.D.) | 3/8" (9.5 mm) |
| Average Air Cons (cfm) | 6.2 |
| Best for | Finishing wood, composite and painted surfaces |
| Model | UT8791 |
| Orbital | 3/16" (4.8 mm) |
| Motor | 0.35 HP |
| Pad Diameter | 4" (10.2 cm) X 6" (15.2 cm) |
| Speed | 10,000 RPM |
| Weight | 2.4 lbs (1.1 kg). |
| Height | 3.8" (9.7 cm) |
| Rec Pressure | 90 PSI-6.2 Bar |
| Air Inlet (NPT) | 1/4" (6.4 mm) |
| Rec Hose (I.D.) | 3/8" (9.5 mm) |
| Average Air Cons (cfm) | 6.2 |
| Best for | Finishing wood, composite and painted surfaces |
