Adjustable Guide with Depth Control System only
By using the Tercoo Guide with its adjustable depth control system, not only can you clean steel, iron, concrete and stone, but fiberglass as well
- Remove the damaged fiberglass gelcoat resulting from osmosis or other intrusions
- It is essential to use the Tercoo Guide depth control AND dust containment system when removing the fiberglass gelcoat to prevent gouging the fiberglass base and to keep the gelcoat/fiberglass particulates from becoming airborne in the working environment
- The Tercoo Guide depth control system (only) is a 3 point device, sometimes referred to as THE SKATE. The Skate allows the operator to accurately and uniformly control the depth of cut in softer materials such as fiberglass
- The depth control system (The Skate) can also be used when cleaning other materials or removing rust from other materials
- Use The Skate (depth control system) with the Tercoo SINGLE (part numer 4101001), Tercoo DOUBLE (part number 4101002) and Tercoo TRIPLE (part number 4101003) rotating blaster discs
- Benefit using the Tercoo Guide in applications other than removing fiberglass gelcoats by achieving longer life for the Tercoo rotating blaster discs. It enables the operator to always apply only the most minimal pressure and keep the rotating blaster disc(s) perpendicular to the work surface.
- The Skate works with most electric drills that have a drill neck at least 1/2 inch wide with a diameter in the range between 1.679 and 1.7126 inches (42.65 to 43.50 millimeters)
- please note:
When using the The Guide depth control (The Skate) system, only electric drills can be used. It is indicated in the description of each electric drill if that particular tool will work with the The Guide depth control (The Skate) portion of the depth control and dust containment system
