Measuring 8-7/64" (206 mm) in height, this 1/4" (6.4 mm) drive dial indicating torque driver measures from 8 to 16 ozin in 0.25 ozin increments. It utilizes a patented torsion bar design that links the square drive directly to the dial, maintaining 2% accuracy in both directions regardless of hand-hold position. The tapered nose facilitates operation in confined areas where clearance is limited.
Measuring 8-7/64" (206 mm) in height, this 1/4" (6.4 mm) drive dial indicating torque driver measures from 8 to 16 ozin in 0.25 ozin increments. It utilizes a patented torsion bar design that links the square drive directly to the dial, maintaining 2% accuracy in both directions regardless of hand-hold position. The tapered nose facilitates operation in confined areas where clearance is limited.
All D series meets or exceeds all applicable requirements of: ANSI / ASME B107.14' (107.14 m), GGG-W-00686C, BS6073: 1988 ISO6789 Enables the user to read the actual twist of the square drive And, since a lever principle isn't used, hand-hold position is not critical, unlike the split or bending beam competitive torque wrenches
Features
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Drive Type | 1/4" (6.4 mm) Square |
| Torque Range | 16 to 8 oz (227 g). In |
| Increments | 0.25 oz in |
| Overall Height | 8-7/64" (206 mm) |
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Drive Type | 1/4" (6.4 mm) Square |
| Torque Range | 16 to 8 oz (227 g). In |
| Increments | 0.25 oz in |
| Overall Height | 8-7/64" (206 mm) |
