Providing immediate torque readings across a 15 to 75 in-lbs range, this 1/4" (6.4 mm) drive dial indicating torque driver utilizes a patented torsion bar design to link the square drive directly to the dial. This construction allows for 2% accuracy from 20% to 100% of full scale regardless of hand-hold position, as it measures the actual twist of the drive rather than relying on a lever principle. The 8-7/64" (206 mm) tool is built with a tapered nose to facilitate operation in confined areas where clearance is limited.
Providing immediate torque readings across a 15 to 75 in-lbs range, this 1/4" (6.4 mm) drive dial indicating torque driver utilizes a patented torsion bar design to link the square drive directly to the dial. This construction allows for 2% accuracy from 20% to 100% of full scale regardless of hand-hold position, as it measures the actual twist of the drive rather than relying on a lever principle. The 8-7/64" (206 mm) tool is built with a tapered nose to facilitate operation in confined areas where clearance is limited.
All D series meets or exceeds all applicable requirements of: ANSI / ASME B107.14' (107.14 m), GGG-W-00686C, BS6073: 1988 ISO6789 Enables the user to read the actual twist of the square drive And, since a lever principle isn't used, hand-hold position is not critical, unlike the split or bending beam competitive torque wrenches
Features
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Drive Type | 1/4" (6.4 mm) Square |
| Torque Range | 15 to 75 in-lbs |
| Increments | 5 in-lbs |
| Secondary Capacity | 1.68 to 8.4 Nm |
| Secondary Scale Increments | 0.2 Nm |
| Overall Height | 8-7/64" (206 mm) |
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Drive Type | 1/4" (6.4 mm) Square |
| Torque Range | 15 to 75 in-lbs |
| Increments | 5 in-lbs |
| Secondary Capacity | 1.68 to 8.4 Nm |
| Secondary Scale Increments | 0.2 Nm |
| Overall Height | 8-7/64" (206 mm) |
