Capable of measuring low-torque applications from 0 to 48 oz-in and 0.6 to 3 lbs-in, this 1/4" (6.4 mm) drive dial indicating torque driver maintains 2% accuracy in both clockwise and counterclockwise directions. Its patented torsion bar design connects the square drive directly to the dial, meaning the measurement reflects the actual twist of the drive and remains unaffected by hand-hold position. The 8-7/64" (206 mm) tool is built with a tapered nose to allow for operation in confined areas where clearance is limited.
Capable of measuring low-torque applications from 0 to 48 oz-in and 0.6 to 3 lbs-in, this 1/4" (6.4 mm) drive dial indicating torque driver maintains 2% accuracy in both clockwise and counterclockwise directions. Its patented torsion bar design connects the square drive directly to the dial, meaning the measurement reflects the actual twist of the drive and remains unaffected by hand-hold position. The 8-7/64" (206 mm) tool is built with a tapered nose to allow for operation in confined areas where clearance is limited.
All D series meets or exceeds all applicable requirements of: ANSI / ASME B107.14' (107.14 m), GGG-W-00686C, BS6073: 1988 ISO6789 Enables the user to read the actual twist of the square drive And, since a lever principle isn't used, hand-hold position is not critical, unlike the split or bending beam competitive torque wrenches
Features
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Drive Type | 1/4" (6.4 mm) Square |
| Torque Range | 96 to 48 oz (1361 g). In |
| Primary Scale Increments | 1 oz in. |
| Secondary Capacity | 0.6 to 3 lbs-in |
| Secondary Scale Increments | 0.0625 lbs-in |
| Overall Height | 8-7/64" (206 mm) |
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Drive Type | 1/4" (6.4 mm) Square |
| Torque Range | 96 to 48 oz (1361 g). In |
| Primary Scale Increments | 1 oz in. |
| Secondary Capacity | 0.6 to 3 lbs-in |
| Secondary Scale Increments | 0.0625 lbs-in |
| Overall Height | 8-7/64" (206 mm) |
