Covering a range of 6 to 30 in-lbs and 0.68 to 3.4 Nm, this 1/4" (6.4 mm) drive dial indicating torque driver maintains 2% accuracy from 20% of full scale to full scale in both directions. The patented torsion bar design links the square drive directly to the dial, meaning the measurement reflects the actual twist of the drive and is not affected by hand-hold position. At 8-7/64" (206 mm) in height, the tool uses a tapered nose to allow for operation in tight spaces with limited clearance.
Covering a range of 6 to 30 in-lbs and 0.68 to 3.4 Nm, this 1/4" (6.4 mm) drive dial indicating torque driver maintains 2% accuracy from 20% of full scale to full scale in both directions. The patented torsion bar design links the square drive directly to the dial, meaning the measurement reflects the actual twist of the drive and is not affected by hand-hold position. At 8-7/64" (206 mm) in height, the tool uses a tapered nose to allow for operation in tight spaces with limited clearance.
All D series meets or exceeds all applicable requirements of: ANSI / ASME B107.14' (107.14 m), GGG-W-00686C, BS6073: 1988 ISO6789 Enables the user to read the actual twist of the square drive And, since a lever principle isn't used, hand-hold position is not critical, unlike the split or bending beam competitive torque wrenches
Features
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Drive Type | 1/4" (6.4 mm) Square |
| Torque Range | 6 to 30 in-lbs |
| Increments | 1 in-lbs |
| Secondary Capacity | 0.68 to 3.4 Nm |
| Secondary Scale Increments | 0.1 Nm |
| Overall Height | 8-7/64" (206 mm) |
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Drive Type | 1/4" (6.4 mm) Square |
| Torque Range | 6 to 30 in-lbs |
| Increments | 1 in-lbs |
| Secondary Capacity | 0.68 to 3.4 Nm |
| Secondary Scale Increments | 0.1 Nm |
| Overall Height | 8-7/64" (206 mm) |
