Eliminating measurement errors caused by hand-hold position, this 1/4" (6.4 mm) drive dial torque driver utilizes a patented torsion bar design to measure torque from 6 to 30 in-lbs The mechanism connects the square drive directly to the dial to maintain 2% accuracy from 20% to full scale in both clockwise and counterclockwise directions. Additionally, the 8-7/64" (206 mm) long body includes a tapered nose to facilitate access to fasteners in areas where operating space is limited.
Eliminating measurement errors caused by hand-hold position, this 1/4" (6.4 mm) drive dial torque driver utilizes a patented torsion bar design to measure torque from 6 to 30 in-lbs The mechanism connects the square drive directly to the dial to maintain 2% accuracy from 20% to full scale in both clockwise and counterclockwise directions. Additionally, the 8-7/64" (206 mm) long body includes a tapered nose to facilitate access to fasteners in areas where operating space is limited.
All D series meets or exceeds all applicable requirements of: ANSI / ASME B107.14' (107.14 m), GGG-W-00686C, BS6073: 1988 ISO6789 Enables the user to read the actual twist of the square drive And, since a lever principle isn't used, hand-hold position is not critical, unlike the split or bending beam competitive torque wrenches
Features
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Drive Type | 1/4" (6.4 mm) Square |
| Torque Range | 6 to 30 in-lbs |
| Increments | 1 in-lbs |
| Secondary Capacity | 7 to 35 kg.cm |
| Secondary Scale Increments | 1 kg.cm |
| Overall Height | 8-7/64" (206 mm) |
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Drive Type | 1/4" (6.4 mm) Square |
| Torque Range | 6 to 30 in-lbs |
| Increments | 1 in-lbs |
| Secondary Capacity | 7 to 35 kg.cm |
| Secondary Scale Increments | 1 kg.cm |
| Overall Height | 8-7/64" (206 mm) |
