Constructed with a patented torsion bar that links the 1/4" (6.4 mm) square drive directly to the dial, this torque driver measures from 6 to 30 in-lbs with 2% accuracy in both clockwise and counterclockwise directions. This design reads the actual twist of the drive, making the measurement independent of hand-hold position to prevent user-induced errors. With an overall height of 8-7/64" (206 mm), the tapered nose provides clearance for fasteners in confined operating spaces.
Constructed with a patented torsion bar that links the 1/4" (6.4 mm) square drive directly to the dial, this torque driver measures from 6 to 30 in-lbs with 2% accuracy in both clockwise and counterclockwise directions. This design reads the actual twist of the drive, making the measurement independent of hand-hold position to prevent user-induced errors. With an overall height of 8-7/64" (206 mm), the tapered nose provides clearance for fasteners in confined operating spaces.
All D series meets or exceeds all applicable requirements of: ANSI / ASME B107.14' (107.14 m), GGG-W-00686C, BS6073: 1988 ISO6789 Enables the user to read the actual twist of the square drive And, since a lever principle isn't used, hand-hold position is not critical, unlike the split or bending beam competitive torque wrenches
Features
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Drive Type | 1/4" (6.4 mm) Square |
| Torque Range | 6 to 30 in-lbs |
| Increments | 1 in-lbs |
| Secondary Capacity | 7 to 35 kg.cm |
| Secondary Scale Increments | 1 kg.cm |
| Overall Height | 8-7/64" (206 mm) |
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Drive Type | 1/4" (6.4 mm) Square |
| Torque Range | 6 to 30 in-lbs |
| Increments | 1 in-lbs |
| Secondary Capacity | 7 to 35 kg.cm |
| Secondary Scale Increments | 1 kg.cm |
| Overall Height | 8-7/64" (206 mm) |
