Constructed with a patented torsion bar that connects the 1/4" (6.4 mm) square drive directly to the dial, this torque wrench measures 0.14 to 0.7 N.m in 0.02 N.m increments. This design eliminates the lever principle, maintaining 2% accuracy from 20% to full scale in both clockwise and counterclockwise directions regardless of hand-hold position. The 8-7/64" (206 mm) long body also features a tapered nose to allow for operation in confined areas where clearance is limited.
Constructed with a patented torsion bar that connects the 1/4" (6.4 mm) square drive directly to the dial, this torque wrench measures 0.14 to 0.7 N.m in 0.02 N.m increments. This design eliminates the lever principle, maintaining 2% accuracy from 20% to full scale in both clockwise and counterclockwise directions regardless of hand-hold position. The 8-7/64" (206 mm) long body also features a tapered nose to allow for operation in confined areas where clearance is limited.
All D series meets or exceeds all applicable requirements of: ANSI / ASME B107.14' (107.14 m), GGG-W-00686C, BS6073: 1988 ISO6789 Enables the user to read the actual twist of the square drive And, since a lever principle isn't used, hand-hold position is not critical, unlike the split or bending beam competitive torque wrenches
Features
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Drive Type | 1/4" (6.4 mm) Square |
| Torque Range | 14 to 7 N.m |
| Increments | 0.02 Nm |
| Overall Height | 8-7/64" (206 mm) |
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Drive Type | 1/4" (6.4 mm) Square |
| Torque Range | 14 to 7 N.m |
| Increments | 0.02 Nm |
| Overall Height | 8-7/64" (206 mm) |
