A 1/2" (12.7 mm) drive dial torque wrench that measures from 50 to 250 ft-lbs and 68 to 340 Nm for precise fastening in both clockwise and counterclockwise directions. It utilizes a patented torsion bar design that connects the square drive directly to the dial, making the 2% accuracy rating unaffected by hand-hold position. The 23-21/32" (600.9 mm) body is finished with a tapered nose to allow for clear operation in confined spaces where clearance is limited.
A 1/2" (12.7 mm) drive dial torque wrench that measures from 50 to 250 ft-lbs and 68 to 340 Nm for precise fastening in both clockwise and counterclockwise directions. It utilizes a patented torsion bar design that connects the square drive directly to the dial, making the 2% accuracy rating unaffected by hand-hold position. The 23-21/32" (600.9 mm) body is finished with a tapered nose to allow for clear operation in confined spaces where clearance is limited.
All D series meets or exceeds all applicable requirements of: ANSI / ASME B107.14' (107.14 m), GGG-W-00686C, BS6073: 1988 ISO6789 Enables the user to read the actual twist of the square drive And, since a lever principle isn't used, hand-hold position is not critical, unlike the split or bending beam competitive torque wrenches
Features
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Overall Length | 23-21/32" (601 mm) |
| Drive Type | 1/2" (12.7 mm) Square |
| Torque Range | 50 to 250 ft-lbs |
| Increments | 10 ft-lbs |
| Secondary Capacity | 68 to 340 Nm |
| Secondary Scale Increments | 10 Nm |
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Overall Length | 23-21/32" (601 mm) |
| Drive Type | 1/2" (12.7 mm) Square |
| Torque Range | 50 to 250 ft-lbs |
| Increments | 10 ft-lbs |
| Secondary Capacity | 68 to 340 Nm |
| Secondary Scale Increments | 10 Nm |
