For precision assembly and inspection in confined spaces, this 3/8" (9.5 mm) drive dial torque wrench measures from 40 to 200 in-lbs in 2.5 in-lbs increments. The patented torsion bar design reads the actual twist of the square drive to maintain 2% accuracy in both clockwise and counterclockwise directions, providing consistent measurements regardless of hand-hold position. Measuring 9-29/32" (251.6 mm) in length, the tool incorporates a tapered nose for access to fasteners where operating space is limited.
For precision assembly and inspection in confined spaces, this 3/8" (9.5 mm) drive dial torque wrench measures from 40 to 200 in-lbs in 2.5 in-lbs increments. The patented torsion bar design reads the actual twist of the square drive to maintain 2% accuracy in both clockwise and counterclockwise directions, providing consistent measurements regardless of hand-hold position. Measuring 9-29/32" (251.6 mm) in length, the tool incorporates a tapered nose for access to fasteners where operating space is limited.
All D series meets or exceeds all applicable requirements of: ANSI / ASME B107.14' (107.14 m), GGG-W-00686C, BS6073: 1988 ISO6789 Enables the user to read the actual twist of the square drive And, since a lever principle isn't used, hand-hold position is not critical, unlike the split or bending beam competitive torque wrenches
Features
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Overall Length | 9-29/32" (252 mm) |
| Drive Type | 3/8" (9.5 mm) Square |
| Torque Range | 40 to 200 in-lbs |
| Increments | 2.5 in-lbs |
| Requirements | ANSI / ASME B107.14 m, GGG-W-00686C, BS6073: 1988, ISO6789 |
| Overall Length | 9-29/32" (252 mm) |
| Drive Type | 3/8" (9.5 mm) Square |
| Torque Range | 40 to 200 in-lbs |
| Increments | 2.5 in-lbs |
