Designed for accurate measurement and diagnostics, this tester supports inspection, testing, and service work. Moreover, it delivers probe-based measurement while supporting consistent inspection and diagnostic results.
Designed for accurate measurement and diagnostics, this tester supports inspection, testing, and service work. Moreover, it delivers probe-based measurement while supporting consistent inspection and diagnostic results.
Power Pro Tester Power Pro is the only tester that's capable of accurately driving both DC and PWM components on today's complex vehicles. Current diagnostic routines dictate time consuming circuit testing and NEVER test the component. More and more of today's vehicles are using Pulse Width Modulated (PWM) motors, actuators and solenoids. You can't simply test them directly applying 12 volts. This can cause expensive misdiagnosis.
Features
| Power Supply | 12 to 25 VDC |
| Output Current | 0 to 40 A (high side/low side drive) |
| Current Display | 0 to 40 A (0.1 A resolution) |
| Pwm Rate | 15 kHz |
| Pwm Range | 0 to 100 percent duty (1 percent increments) |
| Over Temperature | heat sink 150F (output disabled) |
| Over Current | 40 A (output disabled) |
| Continuous On Time | 2 Minutes At 40 Amps 10 Minutes At 20 Amps 25 Minutes At 10 Amps 30 Minutes At 5 Amps |
| Power Supply | 12 to 25 VDC |
| Output Current | 0 to 40 A (high side/low side drive) |
| Current Display | 0 to 40 A (0.1 A resolution) |
| Pwm Rate | 15 kHz |
| Pwm Range | 0 to 100 percent duty (1 percent increments) |
| Over Temperature | heat sink 150F (output disabled) |
| Over Current | 40 A (output disabled) |
| Continuous On Time | 2 Minutes At 40 Amps 10 Minutes At 20 Amps 25 Minutes At 10 Amps 30 Minutes At 5 Amps |
