SmarTach+COP Multisystem Engine Analyzer
The TA500’s unique and proprietary technology allows the user to perform quick and reliable diagnostics of non-starts, misfires, fouled up or damaged spark plugs and/or spark plug wires, by comparing digital read-outs of the spark plug voltage and spark burn time between cylinders on engines using Coil on Plug, Coil near Plug, conventional distributor/ignition coil, DIS (Distributor-less) or waste spark and magneto technologies.
Features
- Simple to use, the TA500 requires no special adapters, cables or a scope
- Equipped with a large digital display that shows spark plug voltage, spark burn time, RPM, as well as Min/Max readings in real time.
Includes:
- TA500
- Protective rubber holster
- Hard padded case for carrying and storage
- 9 Volt alkaline battery
- User's Manual
Technical Specifications:
- Display: Large 4-1/2 Digits LCD + 2 x 3-1/2 + 0 Digits secondary
- displays (for Maximum, Minimum and other functions)
- Tachometer Range: 200 to 19999 RPM
- # of Cylinders: 1, 2, 3, 4, 5, 6, 8, 10 and 12
- Cycles: 2 and 4 Cycles, and DIS
- Tachometer accuracy: ± 0.05% + 1 LSB
- Response time: 0.5 Seconds
- Ignition peak voltage range: 0 to 49.9 KVolt
- Antenna: Flexible with swivel capacitive sensor pick up
- Secondary ignition pick up: Capacitive sensor
- Spark Ignition System: Coil on Plug, Coil near Plug, Distributor, Magneto and D.I.S. (Distributor-less or waste spark ignition system)
- Power Source: One standard 9 Volt alkaline battery type NEDA 1604 IEC 6F 22
- Battery life: Approx. 25 hours of operation
- Power Saving: Auto power off after approximately 1 min. of inactivity
- Physical dimensions : 6 inch (H) x 4 inch (W)x 1.5 inch (D) (158 x 100 X 37 mm) - including holster but excluding antenna
- Weight: Approximately 11.8 oz ( 335 g) Including battery
- Maximum spark plug wire voltage (Through capacitive pickup only): 49.9 KVolt
- Weight: 3 lb
|
