MEGAHAMMER
When Ordinary Methods Won't Work...Try MEGAHAMMER - The Slide Hammer on STEROIDS. Seized Bearing Assemblies Can Take Hours To Remove. Time is money. The MEGAHAMMER cuts repair time in HALF. The MEGAHAMMER is a great time saver. It saves parts from damage that can occur using other methods of removal.
features and benefits:
- The MEGAHAMMER tool is designed to remove a seized bearing assembly, and associated components, from a vehicle chassis for maintenance and repair while minimizing time and cost with little risk of damage. The MEGAHAMMER tool works with 3/4 and 1-Ton American made pick-up trucks with 4, 6 or 8 bolt patterns.
- Optional 5-Bolt & 8-Bolt Heads are also available from MEGAHAMMER. These optional heads will extend the usefulness of the tool by including additional makes and models that are able to be serviced with the MEGAHAMMER tool.
- At 65 pounds and 38 inches total length the MEGAHAMMER is the ultimate contender for all of your tough jobs. The MEGAHAMMER is the must-have tool to service all 4-wheel drive vehicles with captured rotors.
use it for:
- Rotor Replacement
- Hub & Bearing Work
- Axle Service
- Ball Joint Service
The MEGAHAMMER tool will save you both time and money while servicing 3/4 and 1-ton Chevrolet and Dodge pickups with Dana axles. The unique 4-6-8 bolt head will accommodate most trucks. Expand the usefulness of the MEGAHAMMER tool by using the optional 5-bolt head and 8-bolt heads.
specifications:
- 8 inch Head Diameter
- 38 inch Overall Length
- 65 lbs
Over the years rust and corrosion will build up and make removal of a seized bearing assembly almost impossible. Technicians are left with little recourse other than time-consuming and labor-intensive measures to attempt to remove the seized bearing assembly. Most methods of removal employed today risk damaging the vehicle which in turn will increase repair costs. The MEGAHAMMER tool?s unique, patented design cuts repair time in half by employing a less labor-intensive process and greatly reduces the risks of damaging the vehicle. The size and capabilities of MEGAHAMMER make even the most formidable jobs seem easy. Many shops will not provide service to 4-wheel drive vehicles with captured rotors because of the costs and risks involved. With MEGAHAMMER, your shop can confidently handle all of these tough jobs.
Optional 5--bolt head - see KTI70391 - Use the optional 5-Bolt Head with your MEGAHAMMER tool to service 1/2 ton Ford, GM & Dodge trucks with captured rotors.
Optional 8--bolt head - see KTI70392 - Use the optional 8-Bolt Head with your MEGAHAMMER tool to service Ford Super Duty F250/F350 4x4's.
U.S. Patent # 6,971,149
Other Patents Pending
|
